There
are times when a printer does not get utilized for a very long time.
This will result in one of the common issues of clogging that I the
reason behind the inconsistent print outputs. The reason behind
clogging can also be due to the ink cartridge getting exposed to air
when they are removed from the printer. However, if such a case
occurs, before you think about replacing the cartridge, it would be
better to see whether it's clogged or not.
However,
in most of the cases, it is the clogging of the cartridges that need
to be fixed so that they can work in the best possible manner. Below
are some of the ways by which you can successfully fix a clogged ink
cartridge.
Remove
the Cartridge & Locate the Print Head
According
to the model of your printer, you will have to use the proper method
for removing the cartridge. However, in most of the cases by just
opening the lid and lifting the cartridge out will be enough. Now you
will have to locate the print head from where the ink is ejected out
of the cartridge. Just dry off any of the crusty or dried ink with
the help of a soft cloth.
Use
a Moistened Soft Lint Cloth
For
wiping off the print head area, it would be best to make use of moist
lint cloth. It is advised to moist the cloth with distilled water as
the normal water might consist of the mineral deposits. Just take
care that the wet cloth is only used on the print head and not
anywhere else like the nozzle plate.
Run
the Print Head Cleaner Utility Software
Even
after following the above approach you are not able to see a
consistency in your print jobs then it is better to run the print
head cleaner utility software. This software comes with the printer
and might prove to be useful for fixing the clogging issue. However,
if you still cannot get rid of the clogging issue then follow the
below methods.
Submerge
the Print Head in Warm Water
You
will have to fill a small bowl with some warm water. Just fill that
much water which will cover the print head. In case the cartridges
are completely clogged then it is recommended to use a solution that
consists of equal quantities of water and ammonia. Make the toner cartridge
stand in the water-ammonia solution with the print head completely
dipped into it. Now soak the cartridge so that the water cools down.
Finally, dry it by using a soft cloth and insert it into the printer.
In
The End
All
the steps which are mentioned in this article are the best ways of
fixing the clogging issue of an ink cartridges. All these are quite
efficient and simple ways to keep an ink cartridge functioning
properly for a very long time. In most of the cases, as soon as the
cartridge starts malfunctioning users feel that it's the time to
replace the cartridge. However, before investing in a new cartridge
it is better that you follow the above-mentioned steps and make your
cartridge clog free.
